Cynkomet T 149/1 14T лизинг
Опубликовано: 3ч. 33мин.
Опубликовано: 3ч. 33мин.
Опубликовано: 3ч. 33мин.
Poland, LAZUROWA 56 32-642 WŁOSIENICA, POLANDWall height 800 mm thick, hot-dip galvanized – divided side walls
Extensions height 800 mm thick, hot-dip galvanized – divided side extensions
Central locking of walls (bottom sides)
External ladder and feet inside the cargo box hot-dip galvanized, with anti-slip steps facilitating access to the cargo box
Hot-dip galvanized cargo box service support
“Y” type drawbar with replaceable tip, homologated in accordance with UN ECE Regulation 55 (Reg. 55 UN ECE) and 167/2013*2015/208 ND
Bolted hitch rod fi 40
Hot-dip galvanized cargo box frame
Main stringers (with variable cross-section) of the cargo box frame made of bent steel sheets with increased strength, 6 mm thick. Profile cross-section at the highest point 110x300mm
Galvanized cargo box floor welded from two 5 mm thick sheets of sheet metal, screwed and riveted
Hot-dip galvanized lower frame (protection of the structure outside and inside the profiles), frame stringers made of closed profiles 250x150x8 and 150x150x8
Handbrake with crank
Grain chute, hot-dip galvanized with a lock in the rear wall
2 adjustable springs supporting the drawbar
Hot-dip galvanized lighting cover
Ropes connecting the sides
Pallet width
Tipping system secured with a shut-off valve against excessive tilting of the box
Lighting system connection cable with 7PIN 12V plug
12V lighting, homologated, rear bulb lights, side reflectors, front LED side lights
Hydraulic tipping system for the cargo box made of galvanized steel pipes and flexible hoses
Hydraulic connection to the tractor type ISO 7241-1 DN 12.5
Brake system: pneumatic, dual-line with output to the second trailer
Rear hydraulic, electric and brake output to the second trailer
Regenerated wheels 385/65-22.5
Axles from the renowned ADR company, full beam with a square cross-section of 90 mm, brake 400×80
Suspension on parabolic springs
Two wheel chocks placed in galvanized pockets
Telescopic cylinder with articulated suspension, five-stage with a stroke of 1980 mm. Nominal force on the fifth stage with a diameter of 140 mm, at a pressure of 20 MPa = 307.9 kN (31.4 T)
Wheel mudguards
